Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11:10. Lock of a cowl and cable of the drive of the lock
   11:11. Decorative panels of bumpers
   11:12. Forward wing
   11:13. Trunk lid
   11:14. Latch and lock of a trunk lid
   11:15. Cable of the drive of unlocking of a door of a fuel tank / trunk lid
   11:16. Facing panels of doors
   11:17. Door
   11:18. Latch, lock of a door and handle
   11:19. Door glass
   11:20. Window regulator
   11:21. Mirrors
   11:22. Central floor section
   11:23. Decorative panels of a forward part of facing of salon
   11:24. Casings of a steering column
   11:25. Dashboard
   11:26. Facing of a frame of a windshield
   11:27. Seats
   11:28. Ware tray
+ 12. Electric equipment

11:18. Latch, lock of a door and handle

LATCH

PERFORMANCE ORDER

1. Lift glass and remove facing of a door and the water filter (see subsection 11.16.).
	2. Through an aperture in a framework of a door disconnect thirsts from the external handle for a latch, from the lock to a latch and from the internal handle to a latch. The latch fastens to a door end face three screws.
3. All drafts of the mechanism of locking fasten plastic brackets. For their detachment hook a bracket in the place of gearing with draft and remove draft from an opening. On cars with the electric drive of the lock disconnect the socket from a latch.
4. Unscrew screws and remove a latch through an aperture in a door framework.
5. Installation is carried out upside-down.

EXTERNAL HANDLE OF THE DOOR AND LOCK

PERFORMANCE ORDER

1. Lift glass, remove facing of a door and the water filter (see subsection 11.16.).
	2. Through an aperture in a framework of a door disconnect thirst (A) from the external handle for a latch and turn off bolts of fastening of the lock and handle (B).
Prevention It is also possible to turn off bolts and to get the handle outside that facilitates a draft detachment.
	3. Remove the handle and the lock. If necessary disconnect draft in the hinge (A), remove a lock ring or disconnect the socket B and unscrew a bolt From fastening of the switch of the lock (on models with the lock electric drive).
4. Installation is carried out upside-down.