Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11:10. Lock of a cowl and cable of the drive of the lock
   11:11. Decorative panels of bumpers
   11:12. Forward wing
   11:13. Trunk lid
   11:14. Latch and lock of a trunk lid
   11:15. Cable of the drive of unlocking of a door of a fuel tank / trunk lid
   11:16. Facing panels of doors
   11:17. Door
   11:18. Latch, lock of a door and handle
   11:19. Door glass
   11:20. Window regulator
   11:21. Mirrors
   11:22. Central floor section
   11:23. Decorative panels of a forward part of facing of salon
   11:24. Casings of a steering column
   11:25. Dashboard
   11:26. Facing of a frame of a windshield
   11:27. Seats
   11:28. Ware tray
+ 12. Electric equipment

11:19. Door glass

GLASS OF THE FORWARD DOOR

PERFORMANCE ORDER

1. Lift glass and remove facing of a door and the water filter (see subsection 11.16.).
2. Completely lower glass.
	3. Raise glass so that only to provide access to bolts of fastening of glass through openings in a framework of a door (Avalon model).
	4. On the Camry models access to bolts of fastening of glass is provided through openings in the lower part of a door.
	5. On the Solara models raise glass so that to turn off three specified nuts.
6. Cover glass with rags and turn off two bolts of fastening of glass.
7. Get glass.
8. Installation is carried out upside-down.

GLASS OF THE BACK DOOR

PERFORMANCE ORDER

1. Remove facing of a door and the water filter (see subsection 11.16.).
2. Lower glass so that to provide access to glass fastening bolts. Turn off bolts, holding glass. Get glass through a window opening of a door.
	3. On the Avalon models lower glass so that to turn off two specified bolts. At assembly tighten bolts only at the equal sizes A and B.
	4. On the Camry models turn off a bolt And a back guide and two bolts In glass fastenings.
5. Installation is carried out upside-down.

BACK CORNERS (SOLARA MODELS)

Replacement of these glasses is carried out in car service or in a specialized workshop.