Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11:10. Lock of a cowl and cable of the drive of the lock
   11:11. Decorative panels of bumpers
   11:12. Forward wing
   11:13. Trunk lid
   11:14. Latch and lock of a trunk lid
   11:15. Cable of the drive of unlocking of a door of a fuel tank / trunk lid
   11:16. Facing panels of doors
   11:17. Door
   11:18. Latch, lock of a door and handle
   11:19. Door glass
   11:20. Window regulator
   11:21. Mirrors
   11:22. Central floor section
   11:23. Decorative panels of a forward part of facing of salon
   11:24. Casings of a steering column
   11:25. Dashboard
   11:26. Facing of a frame of a windshield
   11:27. Seats
   11:28. Ware tray
+ 12. Electric equipment

11:20. Window regulator

WINDOW REGULATOR OF THE FORWARD DOOR

PERFORMANCE ORDER

1. Remove facing of a door and the water filter (see subsection 11.16.).
2. Remove glass.
3. On cars with the electric drive of a window regulator disconnect the electric motor socket.
	4. On the Avalon or Solara models turn off bolts and nuts of fastening of the electric motor and a window regulator.
	5. On the Camry models (a window regulator like "scissors") designate the provision of a back bolt on the top guide. Turn off bolts on the lower guide, then six screws of fastening of a window regulator and the electric motor (or the manual drive of a window regulator).
6. Remove a window regulator, having got it through an aperture in a door framework.
7. Installation is carried out upside-down. Before installation grease the rubbing parts of a window regulator (shooters specified lubricant points).

WINDOW REGULATOR OF THE BACK DOOR

PERFORMANCE ORDER

1. Remove facing of a door and the water filter (see subsection 11.16.).

2. Remove glass.

3. On cars with the electric drive of a window regulator disconnect the electric motor socket.

4. Turn off bolts of fastening of the electric motor and a window regulator. On all considered cars fastening of the drive of glass of a back door same, as on a lobby.

5. Remove a window regulator, having got it through an aperture in a door framework.

6. Installation is carried out upside-down. Before installation grease the rubbing parts of a window regulator.