Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11:10. Lock of a cowl and cable of the drive of the lock
   11:11. Decorative panels of bumpers
   11:12. Forward wing
   11:13. Trunk lid
   11:14. Latch and lock of a trunk lid
   11:15. Cable of the drive of unlocking of a door of a fuel tank / trunk lid
   11:16. Facing panels of doors
   11:17. Door
   11:18. Latch, lock of a door and handle
   11:19. Door glass
   11:20. Window regulator
   11:21. Mirrors
   11:22. Central floor section
   11:23. Decorative panels of a forward part of facing of salon
   11:24. Casings of a steering column
   11:25. Dashboard
   11:26. Facing of a frame of a windshield
   11:27. Seats
   11:28. Ware tray
+ 12. Electric equipment



11:23. Decorative panels of a forward part of facing of salon

Removal and installation

PERFORMANCE ORDER
1. Disconnect the battery from weight

FACING OF THE GUARD OF DEVICES

PERFORMANCE ORDER
2. On cars with an adjustable steering column completely lower a column down.
3. On the Camry models unscrew two screws in the top part of facing of a guard of devices, give facing on yourself and bring out of gearing with latches (on the Avalon models 4 screws are provided).
4. A screw-driver edge carefully hook the lower part of facing and bring out of gearing with latches.
5. Installation is carried out upside-down.

KNEE BUFFER

PERFORMANCE ORDER
2. Unscrew screws of fastening of the lever of the lock of a cowl to the knee buffer.
3. Press on a box sidewall for trifles (if it is provided) and remove it from the knee buffer.
4. Turn off two bolts of fastening of the knee buffer, give the buffer on yourself and remove from latches. On the Avalon models uncover previously the block of safety locks mounted from the driver.
5. If access to space under the forward panel is necessary, then turn off bolts of fastening of the popliteal buffer which at the same time fix also an intensifying plate. Give on yourself bottom edge of an intensifying plate of the buffer and remove.
6. Installation is carried out upside-down.

CENTRAL FACING PANEL

PERFORMANCE ORDER
2. Hook and remove the central facing panel from latches. On the Avalon models give on yourself the panel and disconnect the socket from the switch of the alarm system (shooter).
3. Install the panel upside-down.

THE LOWER FACING PANEL FROM THE PASSENGER AND THE GLOVE BOX

PERFORMANCE ORDER
2. The lower facing panel from the passenger fastens latches. Hook the panel and remove from latches.
3. On the Camry models open a glove box and give in a box sidewall, then unscrew fastening screws. On the Solara models unscrew two lower screws, open a glove box and unscrew the top screws. Remove a box together with the facing panel.
4. On the Avalon models turn off three nuts under a door of a box and remove a door.