Toyota Camry

1996-2001 of release

LAMPS OF SIDE INDEXES OF TURN / DIMENSIONAL LAMP

PERFORMANCE ORDER

	1. Unscrew the screw (or remove a latch) the top fastening (shooter), give the lamp case outside, having turned it on an axis, turn the holder of a lamp counterclockwise and get a lamp from the case.
2. The lamp is established upside-down.

LAMPS OF BACK INDEXES OF TURN / BACK LAMPS / BRAKING SIGNAL

PERFORMANCE ORDER

	1. On the Avalon models unscrew 2 screws, give the case sideways and remove an optical element.

2. On the Camry and Solara models for access to 3 lamps which are in a body cast away a luggage carrier rug (in the drawing on the right – an arrangement of lamps on the Avalon models).
3. Turn the holder counterclockwise and remove.
	4. For access to the lamps located in a trunk lid it is necessary to open covers on sticky fasteners.
5. Installation is carried out upside-down.

LAMPS OF ILLUMINATION OF REGISTRATION PLATE

PERFORMANCE ORDER

	1. Remove facing of a trunk lid (shooters showed fastening latches).
	2. Turn out cartridges of lamps (shooter) and replace lamps.
3. The lamp is established upside-down.

LAMPS OF THE TOP SIGNAL OF BRAKING

PERFORMANCE ORDER

	1. The plafond of a lamp fastens to a ware tray latches from below, from a luggage carrier. On a part of the Solara models on a trunk lid spoilers with braking signals are established.
	2. For replacement of lamps it is necessary to unscrew 2 screws of fastening of an optical element and to get the panel with lamps.
3. Turn the holder of a lamp counterclockwise and get. Pull a lamp and get from the holder.
4. Installation is carried out upside-down.

LAMPS ON THE GUARD OF DEVICES

PERFORMANCE ORDER

1. Remove a guard of devices. Lamps get from the guard back.
	2. To take turn a lamp counterclockwise.
3. Installation is carried out upside-down.

LAMPS OF INTERNAL LIGHTING

PERFORMANCE ORDER

Remove a plafond of internal lighting and hook a lamp for edge (lamps are inserted in spring holders).