Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
- 1.4. Technical characteristics
1.4.2. Technical characteristics for servicing
1.4.3. Fuses
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
1.4.2. Technical characteristics for servicing
| GENERAL INFORMATION |
Engine
| Valvate gap (cold engine), mm: | |
| – engine 5S-FE | |
| • admission |
0,19 – 0,29
|
| • release |
0,28 – 0,38
|
| – engine 1MZ-FE | |
| • admission |
0,15 – 0,25
|
| • release |
0,25 – 0,35
|
| Type of spark plugs: | |
| – the engine 5S-FE (except Sweden) | |
| • DENSO |
K20TR11
|
| • NGK |
BKR6EKB11
|
| – engines 5S-FE (Sweden) | |
| • DENSO |
PK20TR11
|
| • NGK |
BKR6EKPB11
|
| Spark interval, mm |
1,1
|
Deflection of a driving belt with a pressure a thumb of 98 N (10 kgfs) (the used belt), mm:
Engine 5S-FE
| 1. 13 – 19 3. 10 – 13 |
Engine 1MZ-FE
| 1. 11 – 13,5 2. 12 – 14 |
Amount of oil (discharge and filling), l:
| Engine 5S-FE: | |
| – with the filter |
3,6
|
| – without filter |
3,4
|
| Engine 1MZ-FE: | |
| – with the filter |
4,7
|
| – without filter |
4,5
|
Oil grade
Use the universal SH engine oil, "Energy-Conserving II" or SJ, "Energy-Conserving" of the class API or universal ILSAC oil.
The recommended viscosity (SAE)
The temperature range considered at the following shift of oil
Cooling system
| Total amount, l: | |
| Engine 5S-FE |
6,9
|
| Engine 1MZ-FE |
9,2
|
| Type of cooling liquid |
Toyota Long Lifi Coolant cooling liquid or equivalent
|
Rechargeable battery
| The instrument of specific density read at 20 °C: | |
|
1,250 – 1,290
|
In completely loaded state
|
|
1,160 – 1,200
|
In half the loaded state
|
|
1,060 – 1,100
|
In the discharged state
|
| Charge current: | |
| – bystry charging |
15 And max.
|
| – slow charging |
5 And max.
|
Coupling
| Dead course of a pedal, mm: |
5 – 15
|
| Liquid type: |
SAE J1703 or FMVSS No. 116 DOT 3
|
The transmission with manual switching
| Amount of oil, l: |
2,2
|
| Oil type |
GL-4 or GL-5 gearbox oil on API
|
| The recommended viscosity: |
SAE 75W-90
|
Automatic transmission
ENGINE 1MZ-FE
| Amount of liquid (discharge and filling), l: |
To 4,75
|
| Liquid type: |
Liquid for automatic transmission of D-II or DEXRON III (DEXRON II)
|
ENGINE 5S-FE
Automatic transmission
| Amount of liquid (discharge and filling), l: |
To 2,5
|
| Liquid type: |
Liquid for automatic transmission of D-II or DEXRON III (DEXRON II)
|
| Differential | |
| Amount of liquid, l: |
1,6
|
| Liquid type: |
Liquids for automatic transmission of D-II or DEXRON III (DEXRON II)
|
Brakes
| The minimum gap of a pedal when pressing with a force of 490 N (50 kgfs) at the working engine, mm: | |
| – cars with left-side management |
70
|
| – cars with right-hand management |
80
|
| Dead course of a pedal, mm: |
1 – 6
|
| Adjustment of the parking brake when it is attracted with a force of 196 N (20 kgfs): |
5 – 8 clicks
|
| Liquid type for the steering drive with the amplifier: |
Liquid for automatic transmission of DEXRON II or III
|
Steering
| Dead course of a steering wheel: |
Less than 30 mm
|
| Liquid type for the steering drive with the amplifier: |
Liquid for automatic transmission of DEXRON II or III
|
Tires
The size of the tire and pressure in the tire, kPa (kgf/cm2):
| Tire size |
160 km/h or above
|
It is lower than 160 km/h
| ||
|
Lobby
|
Back
|
Lobby
|
Back
| |
| 195/70R1491V |
250 (2,5)*1
|
250 (2,5)*1
|
220 (2,2)
|
220 (2,2)*1
|
|
240 (2,4)*2
|
220 (2,2)*2
|
200 (2,0)*2
| ||
| Tire size |
210 km/h and above
|
It is lower than 210 km/h
|
| 205/65R1594 |
280 (2,8)*1
|
260 (2,6)*1
|
|
260 (2,6)*2
|
230 (2,3)*2
|
* 1 – For all loadings, including full rated loads
* 2 – For the lowered loadings (only from 1 to 4 passengers)
Torque of an inhaling of nuts of wheels N*m (кгс*м): 104 (105)