Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
- 2. Maintenance
2.2. Schedule of servicing of Toyota Camry/Avalon
2.3. Primary and secondary checks
2.4. Check of level of oil and liquids
2.5. Check of a condition of tires and pressure in tires
2.6. Check of level of liquid of system of hydrostrengthening of steering
2.7. Check of level of automatic transmission liquid
2.8. Replacement of engine oil and oil filter
2.9. Survey and replacement of brushes of screen wipers
2.10. Check, servicing and accumulator charging
2.11. Check, adjustment of a tension and replacement of a driving belt
2.12. Check and replacement of hoses in a motive compartment
2.13. Check of the cooling system
+ 2.14. Shift of wheels
2.15. Check of the brake system
2.16. Replacement of the air filter
2.17. Check of a power supply system
2.18. Check of level of liquid of differential (automatic transmission)
2.19. Check of level of MKPP oil
2.20. Check of steering and suspension bracket
2.21. Check of covers of half shafts
2.22. Check of final system
2.23. Height and free wheeling of pedals of coupling and brake
2.24. Replacement of the fuel filter
2.25. Replacement of cooling liquid and washing of the cooling system
2.26. Check of the system controlling releases of vapors of fuel
2.27. Automatic transmission liquid replacement
2.28. MKPP oil replacement
2.29. Check of fastenings of a body
2.30. Check and replacement of spark plugs
2.31. Check and replacement of wires of spark plugs
2.32. Check and adjustment of gaps of valves
2.33. Replacement of laying of a cover of a jellied mouth of the fuel tank
2.34. Check and replacement of the valve of ventilation of a case
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
|
The following signs can testify to malfunction in the brake system:
– the car pulls aside when pressing a brake pedal;
– the scratch of brakes is heard;
– excessively free wheeling of a pedal of a brake;
– brake pedal pulsation;
– leak of brake fluid, etc.
Disk brakes
| PERFORMANCE ORDER |
|
1. Check thickness of brake slips through an opening in a support (are specified by shooters). |
| 2. For exact check of thickness of brake slips and their state remove supports of brakes and brake slips. Clear slips and check thickness and a condition of frictional material. |
| 3. Measure thickness of a brake disk by means of a micrometer. Examine a disk surface on existence of deep scratches or flutes. |
| 4. Check all brake tubes and hoses for existence of damages or wear. Check reliability of fastenings and connections. |
|
Back drum brakes
| PERFORMANCE ORDER |
|
1. To check thickness of frictional material of brake shoes, without removing the brake drum, remove a rubber cap (it is specified by an arrow) and examine blocks. |
| 2. For more careful check turn off two fixing screws in the center of the brake drum and remove a drum. |
| 3. Clear the brake mechanism by means of means for cleaning of brakes. |
|
4. Measure thickness of frictional material of brake shoes. If material height over heads of rivets is less than 1,5 mm, blocks need to be replaced. |
|
5. Check a condition of springs of the mechanism of a brake. Examine the wheel cylinder on existence of traces of leak. Check integrity of covers of the cylinder. Check brake tubes and connections. |
| 6. Examine the internal surface of the brake drum on existence of cracks, deep scratches and wear tracks. |
|
Vacuum amplifier of the brake system
| PERFORMANCE ORDER |
| 1. Squeeze out a pedal of a brake and start the engine – the pedal has to fall a little. |
| 2. At the working engine squeeze out a brake pedal several times – the course of a pedal of a brake should not change. |
| 3. Squeeze out a brake pedal, kill the engine and hold a pedal in the pressed state within 30 seconds – the pedal should not fall. |
| 4. Start the engine, let's it work several minutes and kill the engine. Squeeze out a brake pedal several times – the course of a pedal has to decrease with each pressing. |
| 5. If the pedal of a brake behaved differently, the vacuum amplifier means it is faulty, and it needs to be replaced. |
|
Emergency brake
| PERFORMANCE ORDER |
| 1. Count number of the clicks necessary for reliable statement of the car on the emergency brake. Adjust the mechanism of the emergency brake if it is necessary. |
| 2. Check that the emergency brake could hold the car on a steep slope. |
| 3. Squeeze out a brake pedal, kill the engine and hold a pedal in the pressed state within 30 seconds – the pedal should not fall. |
| 4. Start the engine, let's it work several minutes and kill the engine. Squeeze out a brake pedal several times – the course of a pedal has to decrease with each pressing. |
| 5. If the pedal of a brake behaved differently, the vacuum amplifier means it is faulty, and it needs to be replaced. |
|
|
|
