Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
- 3. Engines
+ 3.1.2. Check of a compression
+ 3.2. 6-cylinder two-row V6 3,0 engines of l
+ 3.3. Partition of engines
- 3.4. Engine electric equipment
3.4.2. Technical characteristics
3.4.3. Rechargeable battery
3.4.4. Power cables
3.4.5. System of ignition
3.4.6. Coil (i) of ignition
3.4.7. Check of the moment of ignition
3.4.8. Block of electronic ignition
3.4.9. System of a charge of the battery
3.4.10. Generator
3.4.11. Regulator of tension and brush
3.4.12. System of launch of the engine
3.4.13. Starter electric motor
3.4.14. Traction relay
3.4.15. Main malfunctions of electric equipment
3.4.16. What should be known to the owner of the car with the injector engine
3.4.17. Turbo doctor
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
3.4.15. Main malfunctions of electric equipment
| GENERAL INFORMATION |
|
REASON
|
ELIMINATION METHOD
|
|
The starter does not rotate after inclusion of ignition
| |
| The rechargeable battery is discharged | To charge the rechargeable battery. |
| The break in a wire 50 to the ignition switch lock, is damaged an ignition switch wire | To eliminate break, to replace the damaged parts. |
| Break of a wire or conclusion of weight. The rechargeable battery is discharged | To check a wire and a conclusion of the rechargeable battery. To measure tension of the rechargeable battery, if necessary to charge it. |
| Insufficient receipt of current because of the free or oxidized connections | To clear poles and plugs of the rechargeable battery. Obempechit necessary connection between the rechargeable battery, a starter and weight. |
| Lack of tension on a conclusion 50 (the traction relay). The break in a wire, is damaged the ignition switch | To eliminate break, to replace the damaged parts. |
|
The starter works too slowly and does not rotate the engine
| |
| The rechargeable battery is discharged | To charge the rechargeable battery. |
| The engine is not filled with all-weather or winter oil | To fill all-weather oil. |
|
Insufficient current because of the free or oxidized tips of wires | To smooth out polar conclusions of rechargeable batteries, a starter and tips of wires, to delay connections. |
| Brushes do not contact to a collector, I am got jammed in the mandrels, are worn-out are greasy or polluted | To check brushes, to clear or replace. To check the brush holder. |
| Inadequate gap between brushes and a collector | To replace brushes and to clear the brush holder. |
| On a collector deposit, risks, pollution | To Peretochit a collector or to replace an anchor. |
| Lack of tension on a conclusion 50 (at least 80B) | To check switching of the switch of ignition or the traction relay. |
| Bearings are beaten out | To check bearings, if necessary to replace. |
| The traction relay is damaged | To replace the traction relay. |
|
The starter is hooked and begins to work, but the engine does not rotate or rotates breakthroughs
| |
| The gear mechanism (the drive gear wheel mechanism) is damaged | To replace the gear mechanism. |
| The drive gear wheel is polluted | To clear a gear wheel. |
| The gear wreath on a flywheel is damaged | To repair a gear wreath, if necessary to replace a flywheel |
|
The gear mechanism is not separated
| |
| The gear mechanism or screw vents are polluted or damaged | To clear or replace the gear mechanism. |
| The traction relay is damaged | To replace the traction relay. |
| The returnable spring burst or weakened | To replace a spring. |
