Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   + 8.1.2. Care of MKPP
   + 8.2. Automatic transmission
   - 8.3. Coupling
      8.3.2. Coupling – the description and check
      8.3.3. Coupling details
      8.3.4. Release bearing and fork
      8.3.5. Main cylinder of coupling
      8.3.6. Working cylinder of coupling and accumulator
      8.3.7. Coupling hydraulic actuator
      8.3.8. The blocking coupling switch
      8.3.9. Probuksovochka
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment



3beb1f2e


8.3.6. Working cylinder of coupling and accumulator

WORKING CYLINDER

Removal
PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift a car front.
3. Disconnect a hydraulic actuator tube from the cylinder, turn off two bolts (are specified by shooters) and remove the cylinder.

Installation

PERFORMANCE ORDER
Attach a tube of a hydraulic actuator and install the cylinder. Enter a pusher into dredging on a clutch release fork lever. Fix the cylinder and remove air from a hydraulic actuator.

ACCUMULATOR

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Lift a car front.
3. Turn off aktyuator bolts a cruise control, remove an aktyuator and take aside.
4. Remove the battery and a tray of the battery.
5. Remove a starter.
6. Disconnect from the tube accumulator, turn off bolts (are specified by shooters) and remove the accumulator.

Installation

PERFORMANCE ORDER
Install the accumulator, tighten bolts by hand, attach a tube and finally delay all connections.