Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
- 9. Running gear
+ 9.1.2. Technical characteristics
+ 9.2. Steering
+ 9.3. Half shafts
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
Soap2day provides an immersive viewing experience.
9. Running gear
9.1. Suspension brackets
9.1.1. Introduction
| GENERAL INFORMATION |
Knots of a forward suspension bracket and steering
|
1. Steering mechanism
2. Suspension bracket lever 3. Fastening of a spherical support |
4. Rack and spring 5. Draft of the stabilizer |
Knots of a back suspension bracket
|
1. Stabilizer bar
2. Lever of a suspension bracket (N1) 3. Suspension bracket rack rod 4. Arm of a back suspension bracket |
5. Suspension bracket rack 6. Stabilizer bar plug collar 7. Lever of a suspension bracket (N2) |
Forward suspension bracket like McPherson. The top part of a rack fastens to a body through special cups ("caps"). The lower part of a rack fastens to the top part of a rotary fist. The fist fastens to the spherical support mounted on the suspension bracket lever.
The back suspension bracket is also equipped with racks. The top part of a rack fastens to a body through caps. The lower part of a rack fastens to an arm of a back axis. The arm of a suspension bracket is pivotally connected to pair of levers on each party and to a longitudinal bar.
Steering is rack, consists of a gear lath and the sector. The steering mechanism is mounted behind the power unit. The effort to a rotary fist is transmitted through the steering drafts connected to the steering mechanism.
At repair of a suspension bracket it is necessary to moisten previously all fastenings subject to influence of dirt and water, the getting liquid. Application of heating at an otvorachivaniye of threaded connections extremely is not recommended for fire safety reasons.
Replace bolts and nuts which turned away with considerable efforts.
Prevention