Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
6.2. Technical characteristics
6.3. Dumping of pressure in fuel system
6.4. Fuel pump and pressure of fuel
6.5. Fuel tubes and connections of tubes
6.6. Removal and installation of the fuel pump
6.7. Fuel pressure regulator
6.8. Sensor of the index of level of fuel
6.9. Fuel tank
6.10. Cleaning and repair of the fuel tank
6.11. Casing of the air filter
6.12. Accelerator rope
6.13. Electronic system of injection of fuel
6.14. Throttle
6.15. Fuel highway and injectors
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
6. Fuel system
6.1. Introduction
| GENERAL INFORMATION |
Elements of system of injection of fuel – 4-cylinder engines
|
1. Control system wire socket
2. Fuel highway 3. Inlet collector |
4. Throttle 5. Valve of control of the holoty course |
Elements of system of injection of fuel – 6-cylinder engines
|
1. Injector
2. Top section of an inlet collector 3. Fuel highway |
4. Throttle 5. Idling control valve |
The fuel system consists of the fuel tank, the electric fuel pump (located in the fuel tank), the regulator of pressure of fuel, the relay of the fuel pump, the fuel highway and fuel injectors, the air filter and a butterfly valve. All models are equipped with electronic pulse system of injection of fuel.
The final system consists of a final collector (one collector in 4-cylinder models, two collectors in 6-cylinder models), the catalytic converter, the muffler and an inlet tube.