Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Technical characteristics
   6.3. Dumping of pressure in fuel system
   6.4. Fuel pump and pressure of fuel
   6.5. Fuel tubes and connections of tubes
   6.6. Removal and installation of the fuel pump
   6.7. Fuel pressure regulator
   6.8. Sensor of the index of level of fuel
   6.9. Fuel tank
   6.10. Cleaning and repair of the fuel tank
   6.11. Casing of the air filter
   6.12. Accelerator rope
   6.13. Electronic system of injection of fuel
   6.14. Throttle
   6.15. Fuel highway and injectors
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


6.15. Fuel highway and injectors


1. Disconnect a wire of the minus plug of the accumulator.
2. Pit pressure in fuel system.
3. In six-cylinder engines unscrew two bolts (are specified by shooters in the drawing at the left) and shift the block of the operating coils of the vacuum valve aside.
4. Disconnect wires from injectors.
5. Disconnect tubes of supply of fuel from the fuel highway.
6. Unscrew bolts of the fuel highway (are specified by shooters). In the drawing at the left – 4-cylinder engines, on the right – 6-cylinder.
7. Remove the fuel highway together with injectors.
8. Remove injectors from nests of the fuel highway.
9. If you are going to reuse an injector, replace its sealing rings.


Installation is carried out upside-down removals.