Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Technical characteristics
   6.3. Dumping of pressure in fuel system
   6.4. Fuel pump and pressure of fuel
   6.5. Fuel tubes and connections of tubes
   6.6. Removal and installation of the fuel pump
   6.7. Fuel pressure regulator
   6.8. Sensor of the index of level of fuel
   6.9. Fuel tank
   6.10. Cleaning and repair of the fuel tank
   6.11. Casing of the air filter
   6.12. Accelerator rope
   6.13. Electronic system of injection of fuel
   6.14. Throttle
   6.15. Fuel highway and injectors
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


6.8. Sensor of the index of level of fuel


1. Lower pressure in system. Disconnect a wire of the minus plug of the accumulator.
2. Remove the block of the fuel pump.
3. Disconnect a wire of the sensor and connect an ohmmeter to contacts 2 and 3. Measure the sensor resistance when the lever of the measuring instrument is lowered completely down (the tank is empty) about 110-115 Ohms and when the lever is completely lifted (the tank is full) about 2-3 Ohms. When moving the lever resistance has to change evenly.
4. If necessary replace the sensor.


1. Unscrew screws (are specified by shooters) and press an ear And yes pull the sensor up to remove it.
2. Install the new sensor.