Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   - 8.1.2. Care of MKPP
      8.1.3. Gear shifting lever ropes
      8.1.4. Gear shifting lever block
      8.1.5. Switch of lamps of lamps of a backing
      8.1.6. Removal and MKPP installation
   + 8.2. Automatic transmission
   + 8.3. Coupling
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment



3beb1f2e


8.1.5. Switch of lamps of lamps of a backing

Check and replacement
PERFORMANCE ORDER
1. Transfer the ignition key to position of ON and turn on the reverse gear. Lamps of a backing have to light up.
2. If lamps do not light up, check the ignition switch, safety locks, lamps of lamps and conducting.
3. If lamps are not switched off even then when the reverse gear is switched off, check conducting.
4. If the lamp only on the one hand burns, check a lamp of a lamp and conducting.
5. To check as the switch functions, disconnect a wire from the switch, unscrew the switch and connect an ohmmeter to contacts of the switch. The chain of the switch has to be closed when the piston of the switch is pressed and the chain has to be opened when the piston is in a free state.
6. If necessary replace the switch.