Toyota Camry

1996-2001 of release

Repair and operation of the car


Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
- 4. Cooling system
   4.2. Technical characteristics
   4.3. Thermostat
   4.4. The cooling fans
   4.5. Radiator and broad tank
   4.6. Water pump
   4.7. Sensor of temperature of cooling liquid
   4.8. Electric chain of the motor of the delivery fan
   4.9. Electric motor of the delivery fan
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


3beb1f2e



4.7. Sensor of temperature of cooling liquid

 Check

PERFORMANCE ORDER
1. If the sensor of temperature of cooling liquid does not work, check its safety lock.
2. If the indicator of the sensor shows that the engine hot when you only started the cold engine, disconnect a wire from the sensor (it is specified by an arrow). If indications of the indicator decrease, replace the sensor. If indications remain the same, so conducting of the indicator is punched, or the indicator is faulty. In the drawing at the left – the 4-cylinder engine, on the right – 6-cylinder.
3. If the indicator does not show anything after the engine got warm and safety locks of the indicator are whole, kill the engine, disconnect a wire from the sensor and by means of a crossing point connect a wire to grounding of the engine. Without starting the engine, for a moment, include ignition. If the indicator shows that the engine is warmed, replace the sensor.

Replacement

PERFORMANCE ORDER
1. Merge cooling liquid.
2. Disconnect a wire from the sensor.
3. Unscrew the faulty sensor and twist new. Connect a wire and check operation of the sensor.