Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   + 8.1.2. Care of MKPP
   + 8.2. Automatic transmission
   - 8.3. Coupling
      8.3.2. Coupling – the description and check
      8.3.3. Coupling details
      8.3.4. Release bearing and fork
      8.3.5. Main cylinder of coupling
      8.3.6. Working cylinder of coupling and accumulator
      8.3.7. Coupling hydraulic actuator
      8.3.8. The blocking coupling switch
      8.3.9. Probuksovochka
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

8.3.4. Release bearing and fork

Removal

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. Remove transmission.

3. Remove a spring, get a coupling switching off fork, get the release bearing from a fork.

Check

PERFORMANCE ORDER

Holding an external holder check freedom of rotation of the bearing. The bearing has to rotate freely in a holder. Otherwise replace the bearing. It is forbidden to wash out the bearing in solvent.

Installation

PERFORMANCE ORDER

1. Grease an internal flute of the bearing, a vent of a main shaft and the holder of the forward bearing of a main shaft of the check point with refractory lubricant.

2. Grease with refractory lubricant dredging under a spherical support.

3. Grease with refractory lubricant of the place of fastening of the bearing and dredging under a pusher of the working cylinder. Establish a spring bracket.

4. Install the bearing on a fork.

5. Dress the bearing on a main shaft of the check point. Pass a fork through a cover and dress a fork on a support, having pressured her before click.

6. Slightly grease with refractory lubricant the surface of the bearing adjoining to a diaphragm spring.

7. Further assembly is carried out upside-down.