Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   + 8.1.2. Care of MKPP
   + 8.2. Automatic transmission
   - 8.3. Coupling
      8.3.2. Coupling – the description and check
      8.3.3. Coupling details
      8.3.4. Release bearing and fork
      8.3.5. Main cylinder of coupling
      8.3.6. Working cylinder of coupling and accumulator
      8.3.7. Coupling hydraulic actuator
      8.3.8. The blocking coupling switch
      8.3.9. Probuksovochka
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

8.3.7. Coupling hydraulic actuator

Removal of air

Pumping of system will be required every time after carrying out dismantling and assembly of a hydraulic actuator of coupling.

PERFORMANCE ORDER

1. Fill a tank with the fresh DOT-3 brake fluid (use of the fulfilled liquid is forbidden).

2. Lift a car front.

3. Dress a hose on the cylinder union and release in the capacity filled with brake fluid on 5 cm.

4. Ask the assistant to press a coupling pedal to the full. Unscrew the pumping union, having produced liquid, tighten the union and ask the assistant to release a pedal slowly. Repeat the procedure until the hose does not cease to leave vials of air.

5. When pumping constantly you watch level, without allowing withdrawal of liquid from a tank.