Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   + 8.1.2. Care of MKPP
   + 8.2. Automatic transmission
   - 8.3. Coupling
      8.3.2. Coupling – the description and check
      8.3.3. Coupling details
      8.3.4. Release bearing and fork
      8.3.5. Main cylinder of coupling
      8.3.6. Working cylinder of coupling and accumulator
      8.3.7. Coupling hydraulic actuator
      8.3.8. The blocking coupling switch
      8.3.9. Probuksovochka
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

8.3.8. The blocking coupling switch

GENERAL INFORMATION

The blocking coupling switch

The switch is mounted behind a pedal.

Check and adjustment

PERFORMANCE ORDER

1. Make sure that the engine is started only when pressing a coupling pedal to the full (previously check adjustment of a pedal, see subsection 2.23.).
2. Disconnect the socket of the switch and check short circuit of contacts of the switch when pressing its rod. At a rod otpuskaniye contacts have to be opened.
3. If the switch has to be replaced, then turn off a lock-nut and turn out the switch.
	4. At installation of the switch adjust it for what press a pedal of coupling and, rotating the switch, expose distance 5,0 (± 0,5) to mm.