Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
- 1.3. Independent maintenance
1.3.1.2. Choice of engine oil
1.3.1.3. Check of level of cooling liquid of the engine
1.3.1.4. The choice like coolant
1.3.1.5. Check and replacement of the filter of the air conditioner
+ 1.3.2. Wheels and tires
+ 1.3.3. Electric components
1.3.4. Water additive in a washer tank
+ 1.3.5. Replacement of lighting lamps
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
1.3.1.3. Check of level of cooling liquid of the engine
| GENERAL INFORMATION |
Look at a transparent tank for cooling liquid when the engine is cold. Level of cooling liquid satisfactory if it is between the FULL and LOW lines on a tank. If level is lower, then add cooling liquid ethylene - the glycoleft type for appropriate protection of aluminum components against corrosion.
Level of cooling liquid in a tank will change depending on engine temperature. But, if level is below the LOW line, add cooling liquid. Increase level to the FULL line.
If the level of cooling liquid falls for a short time after replenishment, perhaps, there is a leak in system. Visually check a radiator, hoses, a cover of a bulk mouth of cooling liquid of the engine, a cover of a radiator and a drain stopper, the water pump.
If you do not find any leak, it is necessary to check cover pressure at the dealer and to find out whether there is no leak in the cooling system.
Prevention