Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   + 8.1.2. Care of MKPP
   - 8.2. Automatic transmission
      8.2.2. Technical characteristics
      8.2.3. Care of the automatic transmission
      8.2.4. General diagnostics
      8.2.5. Gear shifting lever rope
      8.2.6. Rope of a butterfly valve
      8.2.7. Switch of blocking of ignition
      8.2.8. System of blocking of the lever of gear shifting
      8.2.9. Replacement of epiploons
      8.2.10. Removal and automatic transmission installation
      8.2.11. Electronic control system
      8.2.12. "Automatic machine"
   + 8.3. Coupling
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


3beb1f2e




8.2.10. Removal and automatic transmission installation

Removal
PERFORMANCE ORDER
1. Remove a cowl.
2. Lower pressure in fuel system.
3. Disconnect a wire of the minus plug of the accumulator.
4. Remove the accumulator and the shelf of the accumulator.
5. If the car is equipped with system a cruise control disconnect a wire from the block of the working mechanism of system (it is specified by an arrow) and remove the block.
6. Remove a starter.
7. Uncover a jellied mouth of the fuel tank and disconnect the fuel tubes connecting the engine to a body.
8. Disconnect tubes (are specified by shooters) a radiator of transmission liquid from the transmission.
9. Disconnect a wire from the switch of system of blocking of the lever of gear shifting.
10. Disconnect a wire from the speed sensor.
11. Disconnect ropes from the lever mechanism of a butterfly valve.
12. Disconnect all hoses and wires from the transmission (the bolt of a wire of grounding is specified by an arrow). Mark the ends of all disconnected hoses and wires not to mix them in installation time.
13. Remove the cooling fans. Merge cooling liquid, remove a radiator and all hoses of the cooling system and a heating system.
14. Disconnect a gear shifting lever rope from the transmission.
15. Weaken bolts of forward wheels, lift the car and fix it on support. Fix the engine on the elevator. Remove forward wheels.
16. Remove an arm of a final collector.
17. Remove forward section of an exhaust pipe.
18. Remove protective guards.
19. Merge transmission liquid.
20. Remove half shafts.
21. Unscrew bolts of a forward support of the engine.
22. Twist nuts of the left support of the transmission.
23. Remove a back support of the engine.
24. In the models equipped with steering transfer with the amplifier disconnect steering transfer from a suspension bracket.
25. Unscrew four bolts of an arm of the stabilizer of stability.
26. Tie up steering transfer to a body and unscrew bolts. Steering transfer should not prevent removal of the transmission.
27. Unscrew suspension bracket cross-piece bolts. Removing a cross-piece, do not forget to make adjusting tags.
28. Establish a jack under the transmission.
29. Remove stiffening ribs from the left and right parties of the transmission.
30. Unscrew bolts (are specified by shooters) hydrotransformer covers.
31. Unscrew the bolts fixing the hydrotransformer to a drive plate.
32. Unscrew the bolts fixing the top part of a casing of the transmission to the engine.
33. Unscrew the bolts fixing the lower part of a casing of the transmission to the engine.
34. Disconnect the transmission from the engine and accurately lower it.

Installation

Installation of the transmission is carried out upside-down a snyaytiya.