Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
- 8. Transmission
   + 8.1.2. Care of MKPP
   - 8.2. Automatic transmission
      8.2.2. Technical characteristics
      8.2.3. Care of the automatic transmission
      8.2.4. General diagnostics
      8.2.5. Gear shifting lever rope
      8.2.6. Rope of a butterfly valve
      8.2.7. Switch of blocking of ignition
      8.2.8. System of blocking of the lever of gear shifting
      8.2.9. Replacement of epiploons
      8.2.10. Removal and automatic transmission installation
      8.2.11. Electronic control system
      8.2.12. "Automatic machine"
   + 8.3. Coupling
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

8.2.9. Replacement of epiploons

LEADING HALF SHAFTS

PERFORMANCE ORDER

1. Remove half shafts.

2. Take old epiploons by means of mount or the special tool.

3. Establish new epiploons.

THE CONDENSING RING OF THE CONDUCTED SPEEDOMETER MECHANISM

The sensor of speed of the car and casing of the conducted mechanism of a speedometer are located in a back part of the transmission.

PERFORMANCE ORDER

1. Disconnect a wire from the speed sensor, unscrew fixing bolts (are specified by shooters), remove the sensor and the conducted mechanism.

2. Remove the condensing ring.

3. Establish a new ring and install the mechanism and the sensor on the places.

THE CONDENSING RING OF THE SENSOR OF SPEED OF STSEPLNIYA (6-CYLINDER ENGINES)

The sensor of speed of coupling is located on a transmission casing.

PERFORMANCE ORDER

1. Disconnect a wire from the sensor and remove the sensor.

2. Remove the old condensing ring, establish a new ring and install the sensor into place.