Toyota Camry

1996-2001 of release

Repair and operation of the car

The switch of blocking does not allow to start the engine if any transfer, except parking and neutral is included.

Check of the switch (4-cylinder models)

Position of the lever of the switch of transfers Numbers of contacts, the chain between contacts is closed P 4 – 7 5 – 6 R 4 – 8 – N 4 – 10 5 – 6 D 4 – 9 – 2 2 – 4 – L 2 – 3 –

Check of the switch (6-cylinder models)

Position of the lever of the switch of transfers Numbers of contacts, the chain between contacts is closed P 2 – 7 5 – 6 R 2 – 8 – N 2 – 9 5 – 6 D 2 – 10 – 2 2 – 3 – L 2 – 4 –

Adjustment of the switch (4-cylinder models)

1. Adjusting line 2. Cut

Adjustment of the switch (6-cylinder models)

1. Adjusting line 2. Bolt 3. Cut 4. Bolt

Check

PERFORMANCE ORDER

1. Lift and fix a forward part of the car. 2. Disconnect a wire from the switch. 3. Check by means of an ohmmeter as the switch in all provisions (see rice works. Check of the switch of 4-cylinder models and rice. Check of the switch of 6-cylinder models). 4. If necessary replace the switch.

Replacement

PERFORMANCE ORDER

1. Lift and fix a forward part of the car. 2. Disconnect a wire from the switch. 3. Twist a nut of the switching lever on the transmission (the left arrow), remove the lever and unscrew switch bolts. 4. Remove the switch. 5. Installation is carried out upside-down removals.

Adjustment

PERFORMANCE ORDER

Weaken bolts of the switch and turn it so that to combine a cut and the adjusting line (see rice. Adjustment of the switch of 4-cylinder models and rice. Adjustment of the switch of 6-cylinder models). Tighten switch bolts.