Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
- 9. Running gear
   + 9.1.2. Technical characteristics
   - 9.2. Steering
      9.2.2. Steering wheel
      9.2.3. Tips of steering drafts
      9.2.4. Covers of the steering mechanism
      9.2.5. Steering mechanism
      9.2.6. Pump of the hydraulic booster
      9.2.7. Removal of air from a power steering contour
   + 9.3. Half shafts
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment



canadian pharmacies 3beb1f2e


9.2.3. Tips of steering drafts

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and establish on supports. Remove forward wheels.
2. Keeping draft, release a lock-nut so that it was possible to designate the provision of a tip on a carving part of draft.
3. Turn off a nut and note the provision of an end face of a tip that to wrap a new tip to this mark.
4. Rasshplintuyte also release a nut of steering draft.
5. Vypressuyte the tip hinge, turn off a nut and get a tip.
6. Turn out a tip from steering draft.

Installation

PERFORMANCE ORDER
1. Screw a draft tip to the put tag. Insert the tip hinge into an eye on a rotary fist and tighten a lock-nut.
2. Tighten a koronchaty nut and a zashplintuyta.
3. Establish a wheel and lower the car.
4. Check and if necessary adjust the angles of installation of wheels.