Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
- 9. Running gear
   + 9.1.2. Technical characteristics
   - 9.2. Steering
      9.2.2. Steering wheel
      9.2.3. Tips of steering drafts
      9.2.4. Covers of the steering mechanism
      9.2.5. Steering mechanism
      9.2.6. Pump of the hydraulic booster
      9.2.7. Removal of air from a power steering contour
   + 9.3. Half shafts
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment



canadian pharmacies online 3beb1f2e


9.2.6. Pump of the hydraulic booster

GENERAL INFORMATION

The power steering pump (for cars with the 4-cylinder engine)

1. Right protective panel of a forward wing
2. Union bolt
3. Pressure head tube
4. Belt
5. Laying
6. Vacuum hose
7. Bladed pump of the hydraulic booster
8. Liquid return hose

The power steering pump (for cars with the 6-cylinder engine)

1. Right protective panel of a forward wing
2. Union bolt
3. Laying
4. Pressure head tube
5. Belt
6. Bladed pump of the hydraulic booster
7. Liquid return hose

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove liquid from a tank of the hydraulic booster, having sucked away a pear or the syringe.
3. Lift a forward part of the car and remove the right forward wheel.
4. Remove the protective panel of a forward wing.
5. Weaken a collar and disconnect a hose from the pump of the hydraulic booster.
6. Turn off a bolt of the union and disconnect a tube from the hydraulic booster, copper an union sealant after dismantling of this connection are subject to replacement.
7. Release a bolt of an axis of turn of the pump and a bolt of a natyazhitel of a belt, take off a drive belt.
8. Remove an axial bolt and a bolt of a natyazhitel of a belt. Remove the pump.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down. Adjust a belt tension.
2. Fill a tank with liquid and remove air.