Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
- 1.3. Independent maintenance Choice of engine oil Check of level of cooling liquid of the engine The choice like coolant Check and replacement of the filter of the air conditioner
   - 1.3.2. Wheels and tires Check and replacement of tires Shift of tires Installation of tires for the movement on snow and antisliding chains Replacement of wheels
   + 1.3.3. Electric components
   1.3.4. Water additive in a washer tank
   + 1.3.5. Replacement of lighting lamps
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

3beb1f2e Check and replacement of tires


Check protectors of tires on their indicators of wear of a protector. If indicators are visible, replace tires.

Tires on the Toyota car have the built-in indicators of wear of a protector to help to learn when replacement of tires is required. If depth of a protector wears out to 1,6 mm or less, indicators will be visible. If you find indicators in two or more adjacent flutes, the tire has to be replaced. The protector is lower, the danger of a drift is more.

Efficiency of tires for the movement on snow it is lost if the protector wears out lower than 4 mm.

Regularly check tires for damage, such as, cuts, peelings and cracks. If any damage is revealed, contact technicians and repair or replace the tire.

Even if damage does not look serious, it has to be checked by the qualified technician. Premeasures which got in the tire can become the reason of internal damage.

Any tires which are more than six years old have to be checked by the qualified technician even if no damages are visible.

Tires collapse over time even if they were never used or used seldom. It belongs also to the spare tire and tires stored for future use.

Replacement of tires

When replacing the tire use only the same size and a design, as well as at originally installed tire, and with the same or bigger permissible load.

Use of any other size or type of the tire can seriously influence management, driving, indications of the speedometer/odometer, a road gleam and an interval between tires and a body or use of chains of antisliding.


Do not mix the radial, surrounded or diagonal tires. It can lead to dangerous performance data and as a result to loss of management.

Do not use the tires which were in the use. Use of tires which preliminary destiny is unknown is dangerous.

It is recommended that all four tires – or at least both forward and back – were replaced at the same time in a set.

If the tire was replaced, balancing of wheels has to be always executed.

Unbalanced wheels can influence driving and service life of tires. Wheels can debalance at constant use and, therefore, have to be balanced from time to time.

When replacing tubeless tires the air gate also has to be replaced by new.