Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
- 2. Maintenance
   2.2. Schedule of servicing of Toyota Camry/Avalon
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of steering
   2.7. Check of level of automatic transmission liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Survey and replacement of brushes of screen wipers
   2.10. Check, servicing and accumulator charging
   2.11. Check, adjustment of a tension and replacement of a driving belt
   2.12. Check and replacement of hoses in a motive compartment
   2.13. Check of the cooling system
   + 2.14. Shift of wheels
   2.15. Check of the brake system
   2.16. Replacement of the air filter
   2.17. Check of a power supply system
   2.18. Check of level of liquid of differential (automatic transmission)
   2.19. Check of level of MKPP oil
   2.20. Check of steering and suspension bracket
   2.21. Check of covers of half shafts
   2.22. Check of final system
   2.23. Height and free wheeling of pedals of coupling and brake
   2.24. Replacement of the fuel filter
   2.25. Replacement of cooling liquid and washing of the cooling system
   2.26. Check of the system controlling releases of vapors of fuel
   2.27. Automatic transmission liquid replacement
   2.28. MKPP oil replacement
   2.29. Check of fastenings of a body
   2.30. Check and replacement of spark plugs
   2.31. Check and replacement of wires of spark plugs
   2.32. Check and adjustment of gaps of valves
   2.33. Replacement of laying of a cover of a jellied mouth of the fuel tank
   2.34. Check and replacement of the valve of ventilation of a case
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

2.10. Check, servicing and accumulator charging

Check

Before work with the accumulator prepare necessary tools and materials.

Tools and materials necessary for maintenance of the accumulator

1. Protective guard / points

2. Soda

3. Technical vaseline

4. The tool for cleaning of plugs of the accumulator

5. Laying

6. Stripper

7. The tool for cleaning of contacts

8. Rubber gloves

Prevention

Electrolyte of the accumulator contains sulfuric acid and emits hydrogen which at mix with air becomes explosive. Observe precautionary measures during the work with the accumulator.

PERFORMANCE ORDER

1. Examine the accumulator on existence of leak or damages. Check reliability of fastening of the accumulator. Check a condition of plugs of the accumulator and reliability of contact of wires.

2. Check accumulator charging. On some accumulators for check of charging the special sensor is provided.

Maintenance

Corrosion on accumulator plugs usually looks as white powder.

PERFORMANCE ORDER

	1. If at plugs of the accumulator there are corrosion traces, disconnect wires from the accumulator and remove the accumulator for carrying out cleaning. Always disconnect the first a wire of the minus plug of the accumulator.

2. Carefully clean contacts of wires and the plug of the accumulator by means of a metal brush or the special tool. Wash out plugs solution of warm water with soda.
	3. Clear the shelf of the accumulator if it is necessary. Grease accumulator plugs with technical vaseline and connect wires. Reliably fix the accumulator on the accumulator shelf, having tightened nuts of fastening of the accumulator (are specified by shooters).

Accumulator charging

For accumulator charging it is recommended to use the charger with small current of charging (1–2 Ampere). For bystry charging it is possible to use the charger with big current of charging, however, it should not exceed 1/10 powers of the accumulator.

For a full charge of the accumulator with the charger with small current of charging there are usually enough 12–16 hours.