Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
- 2. Maintenance
2.2. Schedule of servicing of Toyota Camry/Avalon
2.3. Primary and secondary checks
2.4. Check of level of oil and liquids
2.5. Check of a condition of tires and pressure in tires
2.6. Check of level of liquid of system of hydrostrengthening of steering
2.7. Check of level of automatic transmission liquid
2.8. Replacement of engine oil and oil filter
2.9. Survey and replacement of brushes of screen wipers
2.10. Check, servicing and accumulator charging
2.11. Check, adjustment of a tension and replacement of a driving belt
2.12. Check and replacement of hoses in a motive compartment
2.13. Check of the cooling system
+ 2.14. Shift of wheels
2.15. Check of the brake system
2.16. Replacement of the air filter
2.17. Check of a power supply system
2.18. Check of level of liquid of differential (automatic transmission)
2.19. Check of level of MKPP oil
2.20. Check of steering and suspension bracket
2.21. Check of covers of half shafts
2.22. Check of final system
2.23. Height and free wheeling of pedals of coupling and brake
2.24. Replacement of the fuel filter
2.25. Replacement of cooling liquid and washing of the cooling system
2.26. Check of the system controlling releases of vapors of fuel
2.27. Automatic transmission liquid replacement
2.28. MKPP oil replacement
2.29. Check of fastenings of a body
2.30. Check and replacement of spark plugs
2.31. Check and replacement of wires of spark plugs
2.32. Check and adjustment of gaps of valves
2.33. Replacement of laying of a cover of a jellied mouth of the fuel tank
2.34. Check and replacement of the valve of ventilation of a case
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment
2.5. Check of a condition of tires and pressure in tires
| GENERAL INFORMATION |
| For check of depth of a protector it is possible to use the simple measuring device. If depth of a protector decreased below minimum admissible, tires need to be replaced. |
Check a condition of the drawing of a protector and degree of its wear. Uneven wear of tires demonstrates bad balancing of wheels or bad adjustment of a suspension bracket.
Various forms of wear of the drawing of a protector and possible reasons
|
1. Weak pressure in tires |
Steering drafts or steering bipod are worn-out;
Elements of a forward suspension bracket are worn-out or damaged. 4. Too high pressure in tires 5. Wrong adjustment of a suspension bracket |
| Examine tires on existence of cuts, punctures, the got stuck nails or other sharp objects. If there is an air leak, first of all, check reliability of the valve of the camera. | |
| If it as it should be, check the surface of the tire for existence of punctures, having applied soap water on the surface of the tire. Leak of air will prove to be in the form of bubbles. |
| Regularly check pressure in tires by means of the exact sensor. |
