Toyota Camry

1996-2001 of release

Repair and operation of the car


Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
- 2. Maintenance
   2.2. Schedule of servicing of Toyota Camry/Avalon
   2.3. Primary and secondary checks
   2.4. Check of level of oil and liquids
   2.5. Check of a condition of tires and pressure in tires
   2.6. Check of level of liquid of system of hydrostrengthening of steering
   2.7. Check of level of automatic transmission liquid
   2.8. Replacement of engine oil and oil filter
   2.9. Survey and replacement of brushes of screen wipers
   2.10. Check, servicing and accumulator charging
   2.11. Check, adjustment of a tension and replacement of a driving belt
   2.12. Check and replacement of hoses in a motive compartment
   2.13. Check of the cooling system
   + 2.14. Shift of wheels
   2.15. Check of the brake system
   2.16. Replacement of the air filter
   2.17. Check of a power supply system
   2.18. Check of level of liquid of differential (automatic transmission)
   2.19. Check of level of MKPP oil
   2.20. Check of steering and suspension bracket
   2.21. Check of covers of half shafts
   2.22. Check of final system
   2.23. Height and free wheeling of pedals of coupling and brake
   2.24. Replacement of the fuel filter
   2.25. Replacement of cooling liquid and washing of the cooling system
   2.26. Check of the system controlling releases of vapors of fuel
   2.27. Automatic transmission liquid replacement
   2.28. MKPP oil replacement
   2.29. Check of fastenings of a body
   2.30. Check and replacement of spark plugs
   2.31. Check and replacement of wires of spark plugs
   2.32. Check and adjustment of gaps of valves
   2.33. Replacement of laying of a cover of a jellied mouth of the fuel tank
   2.34. Check and replacement of the valve of ventilation of a case
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


3beb1f2e



2.8. Replacement of engine oil and oil filter
GENERAL INFORMATION

Before work prepare necessary tools and materials.

Tools necessary for replacement of an oil filter
 1. Pallet

2. Rubber gloves

3. Wrench handle

4. Nozzle

5. A special key for untwisting of an oil filter

6. A nozzle for untwisting of an oil filter

PERFORMANCE ORDER
1. Warm up the engine. Remove a cap of a jellied mouth of oil.
2. Lift the car and install it on support.
3. Install the pallet under a drain opening of the oil pallet and turn off a cap by means of a cap wrench. Wait until oil flows down. Wipe a cap and establish it into place.
4. Install the pallet under an oil filter and unscrew the filter, rotating it counterclockwise a special key.
5. Wipe the block of cylinders and an opening for installation of the filter.
6. Oil rubber laying of the new filter engine and twirl the filter into place. Twist the filter a hand until laying of the filter concerns the block of cylinders. Then turn the filter in addition on 3/4 turns.
7. Fill in new engine oil through a jellied mouth. Wait until oil flows down in the pallet. Start the engine and check whether there is no leak. Check oil level. If necessary add oil.