1. Pass on the car to warm up liquid of the automatic transmission. |
2. Lift the car and install it on support. |
|
3. Install the pallet under the transmission and turn off a cap of a drain opening. When liquid flows down, wipe a cap and establish it into place.
|
|
4. Turn off fixing bolts of the pallet of the transmission and remove the pallet |
5. Remove old laying. |
|
6. Pour out old liquid of the pallet. |
|
7. Unscrew bolts of the mesh filter and remove it. |
8. Wash out the filter in pure transmission liquid. |
9. Install the filter into place and twirl fixing bolts. |
|
10. Unscrew bolts of the mesh filter and remove it. |
11. Wash out the pallet solvent and dry up it. Establish new laying of the pallet and install the pallet on the transmission. Twirl fixing bolts till the required inhaling moment.
|
|
12. Twist a cap of a drain opening of differential and merge liquid. |
13. Lower the car.
|
14. Get the probe for check of level of oil and fill in new oil in the transmission through a probe tube. |
15. Start the engine and translate the gear shifting lever through all provisions in turn. Again include parking transfer and check liquid level. Add liquid if it is necessary.
|