Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
- 3. Engines
   + 3.1.2. Check of a compression
   - 3.2. 6-cylinder two-row V6 3,0 engines of l
      3.2.2. Check of a compression
      3.2.3. Top Dead Point (TDP) of the N1 piston
      3.2.4. Covers of heads of cylinders
      3.2.5. Inlet collector
      3.2.6. Final collectors
      3.2.7. Gas-distributing belt and asterisks
      3.2.8. Forward epiploon of a bent shaft
      3.2.9. Epiploons of camshafts
      3.2.10. Camshafts and elevators of valves
      3.2.11. Heads of cylinders
      3.2.12. Oil pallet
      3.2.13. Oil pump
      3.2.14. Flywheel / drive plate
      3.2.15. Back epiploon of a bent shaft
      3.2.16. Fastenings of the engine
   + 3.3. Partition of engines
   + 3.4. Engine electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

3.2.4. Covers of heads of cylinders

Removal

PERFORMANCE ORDER

1. Disconnect a wire of the minus plug of the accumulator.
	2. Uncover the engine.
	3. Disconnect wires of coils of ignition, remove coils and spark plugs.
	4. Twist two nuts and disconnect plaits of wires from the left part of the engine.
	5. Disconnect a plait of wires from a cover of a gas-distributing belt, unscrew five bolts and disconnect wires from the right part of the engine.
	6. Twist nuts and uncover heads.

Installation

PERFORMANCE ORDER

1. Carefully clean and wipe with acetone the joined surfaces of covers and heads of cylinders.
2. Establish new laying of tubes of spark plugs.
	3. Establish new laying in covers of heads, apply sealant on the areas specified by shooters and establish covers.
4. Tighten nuts till the required moment of an inhaling and establish the remained details.