Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
- 7. Exhaust system
   - 7.2. Systems of decrease in toxicity of exhaust gases
      7.2.2. Technical characteristics
      7.2.3. OBD II system
      7.2.4. OBD computer of II system (Powertrain Control Module)
      7.2.5. Sensor of turn of a butterfly valve
      7.2.6. The sensor of absolute pressure in the soaking-up collector
      7.2.7. Sensor of a mass consumption of air
      7.2.8. The sensor of temperature of the soaked-up air (IAT sensor)
      7.2.9. Sensor of temperature of cooling liquid (ECT sensor)
      7.2.10. Sensor of rotation of the crankshaft
      7.2.11. Sensor of rotation of a cam-shaft
      7.2.12. Contact sensor of pressure of the hydraulic booster
      7.2.13. The sensor of content of oxygen in the fulfilled gases
      7.2.14. Detonation sensor
      7.2.15. Car speed sensor
      7.2.16. Perepuskna air valve of idling (IAC valve)
      7.2.17. System of the choice of the channel of absorption (ACIS system)
      7.2.18. System of ventilation of a case
      7.2.19. System of recirculation
      7.2.20. System of catching of vapors of gasoline
      7.2.21. Converter
      7.2.22. Rub in one – or how to save the catalyst
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


3beb1f2e




7.2.4. OBD computer of II system (Powertrain Control Module)

GENERAL INFORMATION

Standard fastening of the PCM module

1. Module
2. Facing of a sidewall
3. Powder facing
4. Socket
5. Lower cover
6. Lower panel

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a glove box.
3. Disconnect the socket (ignition at the same time has to be switched off) from the module and turn off fastening bolts.
4. Carefully remove the module, having taken measures to damaging it static electricity.