Toyota Camry

1996-2001 of release

Removal

PERFORMANCE ORDER

1. Remove a back seat and facing of a ware tray.
2. Lift a back part of the car and establish on supports. Remove a wheel.
3. On the cars equipped with ABS system remove a flexible hose and the sensor of speed from the shock-absorber.
	4. Disconnect a brake hose from a rack. On the cars equipped with ABS system disconnect wires from the wheel sensor of speed.
5. Disconnect draft of the stabilizer from a rack.
6. Substitute a jack under an arm of a back axis.
	7. Release nuts of bolts of fastening of a rack to an arm of a suspension bracket (arrow) and beat out bolts. Bolts can be beaten out only after removal of nuts and a poddomkrachivaniye of an arm of a suspension bracket. Keep in mind that it is resistant quite heavy and work should be performed together, the assistant has to support a rack if necessary.
	8. Turn off three nuts of the top fastening of a rack to a body.
9. Lower a jack an arm of a suspension bracket and remove two bolts of fastening of a rack to an arm.
10. Remove a rack.

Check

PERFORMANCE ORDER

Perform procedures from section 3. In need of dismantling for the purpose of replacement of a spring or a rack, perform procedures from section 4.

Installation

PERFORMANCE ORDER

1. Working together, establish a rack in a wheel niche so that hairpins of the top fastening entered openings and screw nuts.

2. Bring an arm to a rack flange, insert bolts and screw nuts. Tighten nuts with the set moment.

3. Attach thirst of the stabilizer for a rack arm.

4. Attach a brake hose to a rack. On the cars equipped with ABS system attach wires to the speed sensor.

5. Establish a wheel and lower the car.

6. Tighten three nuts of the top fastening of a rack with the set moment.

7. Establish a back seat and facing of a ware tray.