Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
- 9. Running gear
   - 9.1.2. Technical characteristics
      9.1.3. Stabilizer of cross stability of a forward suspension bracket
      9.1.4. Rack of a forward suspension bracket
      9.1.5. Rack and spring of a suspension bracket
      9.1.6. Suspension bracket lever
      9.1.7. Spherical support
      9.1.8. Rotary fist and nave
      9.1.9. Nave and bearing of a forward wheel
      9.1.10. Stabilizer and plugs of the stabilizer of a back suspension bracket
      9.1.11. Rack of a back suspension bracket
      9.1.12. Longitudinal bar
      9.1.13. Levers of a back suspension bracket
      9.1.14. Nave and bearing of a back wheel
      9.1.15. Arm of a back suspension bracket
      9.1.16. Angles of installation of wheels
   + 9.2. Steering
   + 9.3. Half shafts
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment



3beb1f2e


9.1.6. Suspension bracket lever

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and remove a wheel from that party with which the suspension bracket lever will be dismantled.
2. Disconnect draft of the stabilizer from the lever (see subsection 9.1.3.).
3. Turn off specified a bolt and nuts of fastening of a spherical support to the lever.
4. Working with mount, take away the suspension bracket lever from a rotary fist.
5. Turn off two bolts of fastening of a forward part of the lever of a suspension bracket to a frame of the engine (arrow).
6. Turn off a bolt and a nut of fastening of a back part of the lever of a suspension bracket to a frame of the engine (arrow).
7. Remove the lever.

Check

PERFORMANCE ORDER
1. Check existence on the lever of deformations. At detection of curvature replace the lever. Rikhtovka of the lever is forbidden.
2. Check a condition of plugs of the lever. At detection on plugs of cracks, gaps and traces of strong wear assembled replace the lever.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down. Tighten all threaded connections with the set moments.
2. Establish a wheel and lower the car.
3. Check and if necessary adjust the angles of installation of wheels.