Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
- 3. Engines
   + 3.1.2. Check of a compression
   + 3.2. 6-cylinder two-row V6 3,0 engines of l
   + 3.3. Partition of engines
   - 3.4. Engine electric equipment
      3.4.2. Technical characteristics
      3.4.3. Rechargeable battery
      3.4.4. Power cables
      3.4.5. System of ignition
      3.4.6. Coil (i) of ignition
      3.4.7. Check of the moment of ignition
      3.4.8. Block of electronic ignition
      3.4.9. System of a charge of the battery
      3.4.10. Generator
      3.4.11. Regulator of tension and brush
      3.4.12. System of launch of the engine
      3.4.13. Starter electric motor
      3.4.14. Traction relay
      3.4.15. Main malfunctions of electric equipment
      3.4.16. What should be known to the owner of the car with the injector engine
      3.4.17. Turbo doctor
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


3.4.3. Rechargeable battery

Launch of the engine in emergency situations

See subsection 1.2.6.


1. Disconnect both cables from the battery, having begun with a negative pole.
2. Check the color indicator. If the indicator of black color, then charge the battery. Check tension which has to be 11,5-12,0 B (previously, before shutdown of the battery, it is recommended it is necessary to turn on driving beam of headlights on 10 with, to turn off the light and other consumers).
3. Periodically it is necessary to check the battery the special load device. At the room temperature tension on the battery should not fall lower than 9,6 Century.


1. Disconnect cables from the battery.
2. Unscrew nuts of fastening (arrow) and disconnect a fastening collar, remove the battery.
3. When replacing the battery be convinced that parameters of the new battery (dimensions, the capacity and current of return) just the same, as at replaced.