Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
- 3. Engines
   + 3.1.2. Check of a compression
   + 3.2. 6-cylinder two-row V6 3,0 engines of l
   + 3.3. Partition of engines
   - 3.4. Engine electric equipment
      3.4.2. Technical characteristics
      3.4.3. Rechargeable battery
      3.4.4. Power cables
      3.4.5. System of ignition
      3.4.6. Coil (i) of ignition
      3.4.7. Check of the moment of ignition
      3.4.8. Block of electronic ignition
      3.4.9. System of a charge of the battery
      3.4.10. Generator
      3.4.11. Regulator of tension and brush
      3.4.12. System of launch of the engine
      3.4.13. Starter electric motor
      3.4.14. Traction relay
      3.4.15. Main malfunctions of electric equipment
      3.4.16. What should be known to the owner of the car with the injector engine
      3.4.17. Turbo doctor
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment


3beb1f2e




3.4.6. Coil (i) of ignition

GENERAL INFORMATION

On V6 engines transfer the ignition key to situation Off, disconnect sockets from coils and check resistance of primary chains of coils.

Prevention

On 4-cylinder engines this procedure is not provided.


Check resistance of secondary chains of coils. For this purpose transfer the ignition key to situation Off, designate and disconnect high-voltage wires (the 4-cylinder engine) from coils.


On V6 engines it is necessary to remove the coil. If resistance differ from standard, then replace the coil of ignition.

Replacement

PERFORMANCE ORDER
1. Disconnect the battery from weight.

4-CYLINDER ENGINES

PERFORMANCE ORDER
2. Remove a throttle branch pipe (see subsection 6.14.).
3. Designate and disconnect the socket and high-voltage wires from the coil.
4. Turn off bolts (shooters) and remove the coil with an arm.
5. Turn off bolts and remove the coil from an arm.
6. Installation is carried out upside-down.

6-CYLINDER ENGINES

PERFORMANCE ORDER
2. Designate and disconnect the socket and high-voltage wires from the coil.
3. Turn off bolts and remove the coil from an arm.
4. Installation is carried out upside-down.