Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
- 10. Brake system
10.2. Technical characteristics
10.3. ABS system
10.4. Blocks of disk brakes
10.5. Brake support
10.6. Brake disk
10.7. Blocks of drum brakes
10.8. Wheel cylinder of brakes
10.9. Main cylinder of brakes
10:10. Hoses and tubes of a hydraulic actuator
10:11. Removal of air from a hydraulic actuator of brakes
10:12. Vacuum amplifier of brakes
10:13. Blocks of the parking brake of back disk brakes
10:14. Parking brake
10:15. Cables of the parking brake
10:16. Braking signal switch
10:17. ABS: natural choice
10:18. Malfunctions of the brake system
+ 11. Body
+ 12. Electric equipment
10:18. Malfunctions of the brake system
| GENERAL INFORMATION |
|
MALFUNCTION
|
REASON
|
| Braking begins when moving a pedal almost to a floor (the increased working course of a pedal) | Leak in system |
| Availability of air in system | |
| Jamming of the mechanism of automatic adjustment of a back brake | |
| Damage of the coupled dosing valve | |
| The raised side side play of a brake disk because of violation of landing of wheel bearings or their wear | |
| "Fenny" pedal | Air in system |
| Violation of adjustment of a gap between blocks and a drum | |
| Contamination of an air vent of a cover of a tank | |
| Deformation of brake shoes | |
| Use of liquid with a low boiling point | |
| Violations in epiploons of a support of a disk brake | |
| Insufficient efficiency of braking | Air in system |
| The increased gap between blocks and a drum | |
| Oiling of blocks or hit of water on them | |
| Uneven prileganiye of blocks to a drum | |
| Leak of brake fluid in system | |
| Hit on a surface of overlays of dirt, oil, jellied lubricant and water | |
| Wear of slips or blocks over an admissible limit | |
| Wear of elements of the main brake cylinder or elements of the working brake cylinder | |
| Jamming of the lever mechanism of a brake pedal | |
| Boiling of pistons of a support of a disk brake | |
| Unbalanced braking | Dispersion of pressure of air in tires |
| Damage of slips or blocks | |
| Damage of the wheel cylinder | |
| Violation of adjustment of landing of wheel bearings | |
| Damage or wear of a surface of reels | |
| Wear of elements of the wheel cylinder | |
| Weakening of elements of fastening of working brake cylinders or basic disk of a brake | |
| Violation of installation of wheels | |
| Vibration of brakes | Damage of slips or blocks |
| Damage of a drum or disk | |
| Oiling of slips | |
| Prikhvatyvaniye of a brake | Violation of adjustment of a pedal |
| Damage of the lever mechanism of the drive of brakes | |
| Malfunction of the main cylinder or wheel cylinder | |
| Damage of blocks | |
| The parking brake does not rastormazhivatsya | |
| Contamination of pipelines or the coupled dosing valve | |
| Damage of returnable springs of brake shoes | |
| Blocking of back wheels | Insufficient efficiency of braking of a forward contour |
| The increased wear or abnormal pressure in tires | |
| Incorrectness of operation of the coupled dosing valve (it is shown by weak pressing a brake pedal) | |
| Local developments on a surface of brake slips | |
| The lowered pressure in tires of back wheels | |
| Decrease in level of liquid in the absence of leak traces on system elements | Leak on the main cylinder in the vacuum amplifier of system |
| Breakage of a spring of the vacuum amplifier | |
| Pulsation of a brake pedal | Ovality or eccentricity of the brake drum |
| The raised side beating of a brake disk | |
| Unevenness of thickness of a brake disk | |
| Spontaneous braking | Violation of adjustment of elements of system |
| Violation of tightness of the vacuum amplifier |
