Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
- 10. Brake system
10.2. Technical characteristics
10.3. ABS system
10.4. Blocks of disk brakes
10.5. Brake support
10.6. Brake disk
10.7. Blocks of drum brakes
10.8. Wheel cylinder of brakes
10.9. Main cylinder of brakes
10:10. Hoses and tubes of a hydraulic actuator
10:11. Removal of air from a hydraulic actuator of brakes
10:12. Vacuum amplifier of brakes
10:13. Blocks of the parking brake of back disk brakes
10:14. Parking brake
10:15. Cables of the parking brake
10:16. Braking signal switch
10:17. ABS: natural choice
10:18. Malfunctions of the brake system
+ 11. Body
+ 12. Electric equipment
10.2. Technical characteristics
| GENERAL INFORMATION |
| Brand of brake fluid |
See subsection 2.1.
|
| Adjusting these pedals of a brake |
See subsection 2.1.
|
| Gap between a rod of the vacuum amplifier and the piston of the main cylinder of a brake |
0 mm
|
| Adjustment of the switch of a signal of braking (the size A for a switch plunger) |
0,8 – 2,4 mm
|
| Disk brakes | |
| Extreme thickness of blocks | |
| – forward brakes | |
| • standard |
2,8 mm
|
| • limit * |
2,6 mm
|
| – back brakes (on models with back disk brakes), the Camry and Camry Solara models | |
| • standard |
0,89 mm
|
| • limit * |
0,80 mm
|
| Brake disk beating | |
| – forward brakes |
0,05 mm
|
| – back brakes |
0,15 mm
|
| • extreme thickness of blocks of the parking brake |
0,8 mm
|
| Drum brakes | |
| Extreme thickness of blocks |
1,6 mm
|
| – internal diameter of a drum | |
| • standard |
228,6 mm
|
| • limit * |
230,6 mm
|
Remark. If on a disk or a drum the values differing from specified in the table are cast, then be guided by the values specified on a disk or a drum.
Moments of an inhaling, Nanometer
| Bolt of fastening of a support to an arm | |
| Forward brakes |
30
|
| Back brakes |
16,8
|
| Bolts of fastening of an arm of a support of a brake | |
| Forward brakes |
95
|
| Back brakes |
41
|
| Bolt of fastening of the union of a hose of a brake to a support |
27
|
| Bolt of fastening of the wheel cylinder of a brake |
8,4
|
| Nut of fastening of the main cylinder of a brake to the vacuum amplifier |
10,8
|
| Nut of fastening of a wheel |
See subsection 2.1.
|