Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11:10. Lock of a cowl and cable of the drive of the lock
   11:11. Decorative panels of bumpers
   11:12. Forward wing
   11:13. Trunk lid
   11:14. Latch and lock of a trunk lid
   11:15. Cable of the drive of unlocking of a door of a fuel tank / trunk lid
   11:16. Facing panels of doors
   11:17. Door
   11:18. Latch, lock of a door and handle
   11:19. Door glass
   11:20. Window regulator
   11:21. Mirrors
   11:22. Central floor section
   11:23. Decorative panels of a forward part of facing of salon
   11:24. Casings of a steering column
   11:25. Dashboard
   11:26. Facing of a frame of a windshield
   11:27. Seats
   11:28. Ware tray
+ 12. Electric equipment


3beb1f2e




11:12. Forward wing

Removal

PERFORMANCE ORDER
1. Lift the car and remove a wheel.
2. Remove a forward lamp of the index of turn / parking lighting (see subsection 1.3.5.2.).
3. The protective panel fastens bolts, screws and plastic latches (arrow).
4. Unscrew screws and remove latches of fastening of the protective panel of a wheel niche, remove the panel and a mud guard.
5. Open a forward door and turn off a bolt of fastening of a wing to a body.
6. Turn off a bolt of the lower fastening of a wing to a body.
7. Turn off a bolt of the panel of a bumper (A) in the lower forward part of a wing, then a bolt of fastening of a wing to an arm (In).
8. After removal of the case of a lamp of the index of turn / parking lighting turn off a bolt of fastening of a forward wing to an arm (shooter).
9. Turn off three bolts of fastening along the top part of a wing.
10. Working with the assistant, raise and remove a wing.

Installation

Installation is carried out upside-down. Before an inhaling of bolts check coincidence of a surface of a wing to surfaces of a door and a cowl.