Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11:10. Lock of a cowl and cable of the drive of the lock
   11:11. Decorative panels of bumpers
   11:12. Forward wing
   11:13. Trunk lid
   11:14. Latch and lock of a trunk lid
   11:15. Cable of the drive of unlocking of a door of a fuel tank / trunk lid
   11:16. Facing panels of doors
   11:17. Door
   11:18. Latch, lock of a door and handle
   11:19. Door glass
   11:20. Window regulator
   11:21. Mirrors
   11:22. Central floor section
   11:23. Decorative panels of a forward part of facing of salon
   11:24. Casings of a steering column
   11:25. Dashboard
   11:26. Facing of a frame of a windshield
   11:27. Seats
   11:28. Ware tray
+ 12. Electric equipment



11:13. Trunk lid

GENERAL INFORMATION

Prevention

Works should be performed together.


Removal

PERFORMANCE ORDER
1. Open a trunk lid and cover the next panels of a body.
2. Remove internal facing of a cover and disconnect sockets of conducting of illumination of a luggage carrier, back lamps from a cover and extend a lock drive cable (see subsection 11.14.). Previously attach a piece of a wire of sufficient length to a cable.
3. Outline contours of loops of a cover.
4. Turn off bolts of fastening of a cover to loops and uncover.

Installation

Installation is carried out upside-down. At installation combine loops with the contours put at removal.

Adjustment

PERFORMANCE ORDER
1. Adjustment of provision of a trunk lid is provided with movement of a cover in openings under bolts of fastening of loops across after their easing.
2. The provision of a cover on height (and alignment of a cover with the surface of the next panels of a body) is regulated by movement of a clamp of the lock of a cover at the released bolts (arrow). Previously outline clamp contours.