Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11:10. Lock of a cowl and cable of the drive of the lock
   11:11. Decorative panels of bumpers
   11:12. Forward wing
   11:13. Trunk lid
   11:14. Latch and lock of a trunk lid
   11:15. Cable of the drive of unlocking of a door of a fuel tank / trunk lid
   11:16. Facing panels of doors
   11:17. Door
   11:18. Latch, lock of a door and handle
   11:19. Door glass
   11:20. Window regulator
   11:21. Mirrors
   11:22. Central floor section
   11:23. Decorative panels of a forward part of facing of salon
   11:24. Casings of a steering column
   11:25. Dashboard
   11:26. Facing of a frame of a windshield
   11:27. Seats
   11:28. Ware tray
+ 12. Electric equipment


11:27. Seats



Part of cars is completed with seat belts with the pyrosystem of a preliminary tension working at accident. On these cars it is forbidden to dismantle seat belts and to disconnect any sockets about belts. About malfunction of such system specifies fire of an emergency lamp of a safety cushion. In this case the car immediately should be handed over in car service.

On cars with side safety cushions before removal of seats deactivate the safety module (see subsection 12.1.26.).

1. Remove slips and turn off bolts of fastening of a seat.
2. Turn off bolts of fastening of a seat (all 3 of 4 bolts are specified).
3. Cast away a seat forward, disconnect sockets and remove a seat.
4. Installation is carried out upside-down.


1. Raise a seat pillow, turn off a bolt and remove a pillow, having brought seat belts out of grooves in a back part of a seat.
2. On the Camry and Solara models give each back up, having brought it out of locks and cast away forward. Turn off bolts. On the Avalon models remove a pillow and turn off 4 bolts (arrow).
3. Installation is carried out upside-down.