Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
- 11. Body
   11.2. Vinyl finishing
   11.3. Upholstery and rugs
   11.4. Insignificant damages of a body
   11.5. Considerable damages of a body
   11.6. Loops and locks
   11.7. Windshield and motionless glasses
   11.8. Central lock
   11.9. Cowl
   11:10. Lock of a cowl and cable of the drive of the lock
   11:11. Decorative panels of bumpers
   11:12. Forward wing
   11:13. Trunk lid
   11:14. Latch and lock of a trunk lid
   11:15. Cable of the drive of unlocking of a door of a fuel tank / trunk lid
   11:16. Facing panels of doors
   11:17. Door
   11:18. Latch, lock of a door and handle
   11:19. Door glass
   11:20. Window regulator
   11:21. Mirrors
   11:22. Central floor section
   11:23. Decorative panels of a forward part of facing of salon
   11:24. Casings of a steering column
   11:25. Dashboard
   11:26. Facing of a frame of a windshield
   11:27. Seats
   11:28. Ware tray
+ 12. Electric equipment



11:16. Facing panels of doors

Removal

PERFORMANCE ORDER
1. On cars with the manual drive of a window regulator remove the drive handle, having removed a bracket with fabric.
2. Remove the button of blocking of the lock.
3. On cars with the electric drive of a window regulator hook and remove a switch plate under which there is one of bolts of fastening of the panel (shooter).
4. Hook and remove an external cover of a mirror.
5. Hook and remove a cap, unscrew the screw.
6. In a forward part of a door remove plastic caps (A) and turn out screws (B).
7. Hook and remove a cap, unscrew the screw in a back part of a door.
8. Carefully hook and remove the panel from latches.
9. Give the panel up, disconnect sockets and remove the panel.

10. For access to a window regulator or to the external handle of a door lift glass, shoot the control unit of a window regulator (with parts of cars), an arm of the facing panel and the loudspeaker (see subsection 12.1.14.).

11. Then carefully remove the water filter.

Installation

Installation is carried out upside-down. Previously be convinced available all latches of door facing. Before installation of the panel into place connect all sockets.