Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
- 12. Electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crossing points
      12.1.5. Breakers
      12.1.6. Relay
      12.1.7. Breaker of indexes of turn / alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. Lock of ignition and drum of the lock
      12.1.10. Dashboard switches
      12.1.11. Indexes of level of fuel and temperature of oil
      12.1.12. Guard of devices
      12.1.13. Screen wiper electric motor
      12.1.14. Receiver and loudspeakers
      12.1.15. Antenna
      12.1.16. Heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. Case of a halogen headlight
      12.1.20. Sound signal
      12.1.21. Replacement of lamps
      12.1.22. Side mirrors with the electric drive
      12.1.23. System cruise control
      12.1.24. Window regulator electric drive
      12.1.25. Electric drive of door locks
      12.1.26. Safety cushions
   + 12.2. Electrical circuitries


3beb1f2e




12.1.11. Indexes of level of fuel and temperature of oil

GENERAL INFORMATION

The scheme of resistance between conclusions of indexes of level of fuel and temperature of oil

1. Index of level of fuel

2. Index of temperature

Check

PERFORMANCE ORDER
1. Transfer the ignition key to position of ON.
2. If shooters of indexes remain motionless, then check a safety lock. If the safety lock is serviceable, then find the sensor of the corresponding index and connect a sensor wire to weight. If the arrow moves to the necessary area of a scale of the index, then replace the sensor. Otherwise connect to weight a conclusion on a reverse side of the index which is connected to the sensor (at the same time be guided by the scheme). If the arrow moved, then conducting from the index on the sensor is faulty. Otherwise check tension on the second conclusion of the index. If tension is present, then replace the index.

Prevention

Resistance between conclusions And yes In on the serviceable index of level of fuel has to be 126 Ohms, between And yes With – 280 Ohms both between In and With – 154 Ohms. On the serviceable index of temperature these resistance have to be 175 Ohms (And – In), 54 Ohms (And – C) and 229 Ohms (In – C).


3. For verification of indexes remove a guard of devices and check resistance of indexes.