Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
- 12. Electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crossing points
      12.1.5. Breakers
      12.1.6. Relay
      12.1.7. Breaker of indexes of turn / alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. Lock of ignition and drum of the lock
      12.1.10. Dashboard switches
      12.1.11. Indexes of level of fuel and temperature of oil
      12.1.12. Guard of devices
      12.1.13. Screen wiper electric motor
      12.1.14. Receiver and loudspeakers
      12.1.15. Antenna
      12.1.16. Heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. Case of a halogen headlight
      12.1.20. Sound signal
      12.1.21. Replacement of lamps
      12.1.22. Side mirrors with the electric drive
      12.1.23. System cruise control
      12.1.24. Window regulator electric drive
      12.1.25. Electric drive of door locks
      12.1.26. Safety cushions
   + 12.2. Electrical circuitries

12.1.22. Side mirrors with the electric drive

GENERAL INFORMATION

The mirror drive in the majority of models is carried out from 2 electric motors of vertical and horizontal shift.

PERFORMANCE ORDER

1. Include ignition (not to start the engine) and lower side glasses. The selector which is built in in the switch include the necessary mirror and check operation of the drive of the right and left mirrors, displacing them to the right and to the left, up and down.

2. Listen to operation of electric motors.

3. If operation of electric motors is listened, and the mirror does not move, then the drive mechanism in a mirror is faulty. Remove a mirror and sort.

4. If operation of electric motors is not listened and mirrors do not move, then check a safety lock.

5. If the safety lock is serviceable, then get the switch and check short circuit of its contacts.

6. Attach the switch. Find a wire from the switch on weight. Without disconnecting the switch close a crossing point this wire on weight. If the mirror works normally with a crossing point, then repair "regular" connection with weight.

7. If the mirror does not work, then sort a mirror and check presence of tension on wires. Include ignition and transfer the switch to all provisions, checking tension. On one of wires from the switch tension has to be in each its family way (except for situation Off).

8. If tension is absent, then check a chain from a mirror to the switch.

9. If tension is, then remove a mirror and check its work, having executed connection through crossing points. If the mirror does not work, then replace it.