|
Toyota Camry1996-2001 of releaseRepair and operation of the car |
|
Toyota Camry + 1. Maintenance instruction + 1.2. Information before driving of the car + 1.3. Independent maintenance + 1.4. Technical characteristics + 1.5. Several councils upon purchase of the car + 2. Maintenance + 3. Engines + 4. Cooling system + 5. Heating and ventilation + 6. Fuel system + 7. Exhaust system + 8. Transmission + 9. Running gear + 10. Brake system + 11. Body - 12. Electric equipment - 12.1.2. Search of malfunctions 12.1.3. Safety locks 12.1.4. Fusible crossing points 12.1.5. Breakers 12.1.6. Relay 12.1.7. Breaker of indexes of turn / alarm system 12.1.8. A combination of switches on a steering column 12.1.9. Lock of ignition and drum of the lock 12.1.10. Dashboard switches 12.1.11. Indexes of level of fuel and temperature of oil 12.1.12. Guard of devices 12.1.13. Screen wiper electric motor 12.1.14. Receiver and loudspeakers 12.1.15. Antenna 12.1.16. Heater of back glass 12.1.17. Lamps of headlights 12.1.18. Headlights 12.1.19. Case of a halogen headlight 12.1.20. Sound signal 12.1.21. Replacement of lamps 12.1.22. Side mirrors with the electric drive 12.1.23. System cruise control 12.1.24. Window regulator electric drive 12.1.25. Electric drive of door locks 12.1.26. Safety cushions + 12.2. Electrical circuitries |
12.1.24. Window regulator electric drive
The chart for a prverka of the main switch of the electric drive of a window regulator
* only at the unlocked position of the switch (Unlocked) ** only at the position of the switch locked (Locked) The chart for a prverka of the switch of the electric drive of a window regulator of a forward door from the passenger
The chart for a prverka of the switch of the electric drive of a window regulator of a back door
The electric drive of a window regulator provides rise and lowering of side windows. Switches, the relay, electric motors, a window regulator and wires are its part. The electric drive turns on or the main switch on the driver's door, or remote switches on each of doors. Lowering or raising of glasses are regulated. In each door the reversive electric motor is mounted. The chain of the electric drive is protected by a safety lock and a breaker. In each electric motor the individual breaker is in addition mounted. The electric drive of a window regulator works only at the included ignition. On a part of cars the blocking switch which switches-off electric drives of other windows except driver's is provided. Below the general procedures of search of malfunctions which can be executed independently are described. If malfunction with their help cannot be eliminated, then address to car service. If window regulators of all windows do not work, then at first check a safety lock and a breaker. If window regulators only of back windows do not work, or the drive works only from the main switch, then check short circuit of contacts of the blocking switch. If contacts do not become isolated, then replace the switch. Check a condition of conducting between switches and a safety lock, if necessary repair. If only one window regulator does not work, then check the main switch and the switch of an idle window (except driver's). If the window regulator works only from one switch, then check short circuit of contacts of the switch (see the Chart for check of the main switch of the electric drive of a window regulator). If results of check negative, then the switch replace. If the switch is serviceable, then check a chain between the switch and the electric motor. If from both switches the same window regulator does not work, then remove the panel, include a window regulator and check tension on the switch and the electric motor. If tension is present at the electric motor, then disconnect glass from a window regulator and check freedom of its movement up and down. Check also freedom of movement of a window regulator. If damages are absent and glass moves freely, then replace the electric motor. Otherwise grease details or replace. If tension on the electric motor is absent, then check wires from switches to electric motors. If the relay is provided in a chain, then check presence of tension for the relay and its connection with weight. Upon termination of check work of a window regulator. |
|