Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
- 12. Electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crossing points
      12.1.5. Breakers
      12.1.6. Relay
      12.1.7. Breaker of indexes of turn / alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. Lock of ignition and drum of the lock
      12.1.10. Dashboard switches
      12.1.11. Indexes of level of fuel and temperature of oil
      12.1.12. Guard of devices
      12.1.13. Screen wiper electric motor
      12.1.14. Receiver and loudspeakers
      12.1.15. Antenna
      12.1.16. Heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. Case of a halogen headlight
      12.1.20. Sound signal
      12.1.21. Replacement of lamps
      12.1.22. Side mirrors with the electric drive
      12.1.23. System cruise control
      12.1.24. Window regulator electric drive
      12.1.25. Electric drive of door locks
      12.1.26. Safety cushions
   + 12.2. Electrical circuitries


3beb1f2e




12.1.9. Lock of ignition and drum of the lock

GENERAL INFORMATION

The chart for check of the lock of ignition

Provision of a key
The tested conclusions
Existence of a chain
LOCK
There is no chain
ACC
2 – 3
There is a chain
ON
2 – 3 – 4
6 – 7
There is a chain
START
1 – 2 – 4
6 – 7 – 8
There is a chain

Check

PERFORMANCE ORDER
1. Disconnect the ignition lock socket, having found it on wires from the lock.
2. An ohmmeter or a control lamp check existence of a chain between the specified conclusions, in different provisions of a key. Replace the lock if results at least with one of checks negative.

Replacement

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Transfer a key to the provision of ASSORTMENT.
3. Remove a wheel.
4. Remove both casings of a steering column.
5. Remove a combination of switches from a wheel shaft.

Replacement of the lock of ignition

PERFORMANCE ORDER
1. Disconnect from the wire ignition lock.
2. Unscrew fastening screws (are specified by shooters) and remove the lock.
3. Installation is carried out upside-down.

Replacement of the switch (drum) of the lock

PERFORMANCE ORDER
1. Press the thin screw-driver the sprung pin.
2. Transfer a key to the provision of ASS, press a pin and remove the lock switch.
3. At installation of the lock press on a pin and insert the switch into a nest on a steering column before fixing by a pin which has to come into an opening on a steering column.
4. Further assembly is carried out upside-down.