Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
+ 3. Engines
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
- 12. Electric equipment
   - 12.1.2. Search of malfunctions
      12.1.3. Safety locks
      12.1.4. Fusible crossing points
      12.1.5. Breakers
      12.1.6. Relay
      12.1.7. Breaker of indexes of turn / alarm system
      12.1.8. A combination of switches on a steering column
      12.1.9. Lock of ignition and drum of the lock
      12.1.10. Dashboard switches
      12.1.11. Indexes of level of fuel and temperature of oil
      12.1.12. Guard of devices
      12.1.13. Screen wiper electric motor
      12.1.14. Receiver and loudspeakers
      12.1.15. Antenna
      12.1.16. Heater of back glass
      12.1.17. Lamps of headlights
      12.1.18. Headlights
      12.1.19. Case of a halogen headlight
      12.1.20. Sound signal
      12.1.21. Replacement of lamps
      12.1.22. Side mirrors with the electric drive
      12.1.23. System cruise control
      12.1.24. Window regulator electric drive
      12.1.25. Electric drive of door locks
      12.1.26. Safety cushions
   + 12.2. Electrical circuitries



3beb1f2e


12.1.20. Sound signal

GENERAL INFORMATION

Prevention

At refusal of a signal at first check safety locks.


Check

PERFORMANCE ORDER
1. Disconnect the socket from a signal.
2. Directly connect the battery to a signal. In the absence of a sound replace a signal.
3. If the sound is, then check tension on a conclusion when pressing the signal button (the right arrow). In the presence of tension check connection with weight.
4. If there is no tension, then check the relay. It is necessary to consider that relays of a sound signal generally have 4 or 3 conclusions (3-output relays have connection with weight via the case).
5. If the relay is serviceable, then check tension on relay conclusions. If there is no tension, then check wires from a safety lock to the relay.
6. If on relay conclusions tension is, then press the button of a signal and check a chain of connection with weight between the relay and the button. If there is no break, then replace the signal button.
7. If via the button the chain on weight becomes isolated, then check existence in a chain from the relay for the button of break or short circuit.

Replacement

PERFORMANCE ORDER
1. For replacement of a sound signal disconnect the socket and turn off a bolt.
2. Installation is carried out upside-down.