Toyota Camry

1996-2001 of release

Repair and operation of the car

Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
- 3. Engines
   - 3.1.2. Check of a compression
      3.1.3. Top Dead Point (TDP) of the N1 piston
      3.1.4. Cover of a head of cylinders
      3.1.5. Inlet collector
      3.1.6. Final collector
      3.1.7. Gas-distributing belt and asterisks
      3.1.8. Forward epiploon of a bent shaft
      3.1.9. Camshaft epiploon
      3.1.10. Camshafts and elevators of valves
      3.1.11. Head of cylinders
      3.1.12. Oil pallet
      3.1.13. Oil pump
      3.1.14. Flywheel / drive plate
      3.1.15. Back epiploon of a bent shaft
      3.1.16. Fastenings of the engine
   + 3.2. 6-cylinder two-row V6 3,0 engines of l
   + 3.3. Partition of engines
   + 3.4. Engine electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment

3.1.15. Back epiploon of a bent shaft

Replacement

PERFORMANCE ORDER

1. Remove the transmission.
	2. You can replace an epiploon without removing its casing from the engine. Take an old epiploon by means of the screw-driver, grease a new epiploon and a nest of an epiploon with universal lubricant and press an epiploon into place.
Prevention It is not recommended to make replacement thus because you can easily damage an epiploon.
3. To remove an epiploon casing, remove the oil pallet.
	4. Beat out an old epiploon from a casing.
	5. Press a new epiploon.
6. Grease an epiploon with universal lubricant and put on a bent shaft. Insert and tighten epiploon casing bolts till the required inhaling moment.