Toyota Camry

1996-2001 of release

Repair and operation of the car



Toyota Camry
+ 1. Maintenance instruction
+ 1.2. Information before driving of the car
+ 1.3. Independent maintenance
+ 1.4. Technical characteristics
+ 1.5. Several councils upon purchase of the car
+ 2. Maintenance
- 3. Engines
   - 3.1.2. Check of a compression
      3.1.3. Top Dead Point (TDP) of the N1 piston
      3.1.4. Cover of a head of cylinders
      3.1.5. Inlet collector
      3.1.6. Final collector
      3.1.7. Gas-distributing belt and asterisks
      3.1.8. Forward epiploon of a bent shaft
      3.1.9. Camshaft epiploon
      3.1.10. Camshafts and elevators of valves
      3.1.11. Head of cylinders
      3.1.12. Oil pallet
      3.1.13. Oil pump
      3.1.14. Flywheel / drive plate
      3.1.15. Back epiploon of a bent shaft
      3.1.16. Fastenings of the engine
   + 3.2. 6-cylinder two-row V6 3,0 engines of l
   + 3.3. Partition of engines
   + 3.4. Engine electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. Exhaust system
+ 8. Transmission
+ 9. Running gear
+ 10. Brake system
+ 11. Body
+ 12. Electric equipment



3beb1f2e


3.1.4. Cover of a head of cylinders

Removal

PERFORMANCE ORDER
1. Disconnect a wire of the minus plug of the accumulator.
2. Disconnect a ventilating hose from a head cover.
3. Disconnect wires from spark plugs.
4. Unscrew a bolt of a clamp of a plait of wires and shift wires aside.
5. Twist nuts of nests of spark plugs and uncover a head together with laying.

Installation

PERFORMANCE ORDER
1. Carefully clean surfaces of a cover and a head of cylinders.
2. Apply sealant on the joined surfaces (are designated by shading). Establish the condensing rings of nests of spark plugs, tags on rings have to be directed towards a gas-distributing belt.
3. Establish new laying of a cover, establish a cover and nuts of nests of spark plugs.
4. Tighten nuts till the required inhaling moment.
5. Establish the remained details, start the engine and check it for existence of leaks.